Size : 1000 x 40 x 20 mm angle V profile
Model number : GLCS-1
Anti-collision Strips /Impact Protection Buffers
Impact protection buffers. Highly Visible Black and Yellow or Red and White. Prevent injuries, bumps and knocks from exposed edges, corners and low head height protrusions.
Features of Impact Protection Buffers
Soft foam protects from injury - bumps and knocks from exposed edges, corners and low head height protrusions.
Four profiles - Flat, Round corner, Square corner and Round Edge
1 metre lengths are easily cut to required size with sharp knife
Highly visible Black / Yellow or Red / White diagonal stripes
Simple installation with 'peel and stick' double sided tape
Model number
GLCS-1 Impact Protection Buffer 1000 x 40mm x 20mm angle - V Profile
GLCS-2 Impact Protection Buffer 1000 x 80mm x 8.5mm deep - Rectangular Profile
GLCS-3 Impact Protection Buffer 1020 x 45mm x 35mm angle - L Profile
GLCS-4 Impact Protection Buffer 1010 x 40mm x 8mm slot - C Profile
Specifications of Impact Protection Buffers
Anti collision strips
Closed cell polyurethene foam
Yellow/Black or Red/White diagonal stripes
1000mm
Double sided tape - peel & stick
Package
1 pcs in a OPP bag , 30 pcs in a carton Carton size : 105 x 26 x 21.50 CM ( L X W X H )
Carton photos as below
